Faisal Tower ‐ Projection & Audio
Exhibit Type: Projection Video Playback
Audio Sync Type: Close Sync
Server Room: SER 12 ‐ MM1
For this video presentation, as indicated, we recommend utilizing (1) 7th Sense infinity video players feeding 1080p HDMI signal to (5) Digital Projection 13,000 Lumen, 3‐DLP Laser projectors. Two Projectors, located in existing bunkers will use 1.45‐1.74:1 zoom lenses while the longer throw will use a 4.3‐6.8:1 zoom lens to produce image sizes of approximately 9900mm x 5568mm in landscape mode. The images are blended utilizing software internal to the servers to achieve coverage of the tower from above the top of the stairs to the top of the tower and approximately 180 degrees. The projectors and players are located inside environmental enclosures. An 8‐Port network switch with an integrated fiber port is located within each projector enclosure to provide TCP/IP signal to/from the Master Controller allowing functionality control and status feedback of the projector and player and to monitor the status and health of the environmental enclosure. The network connection to the player also allows content to be loaded from remote locations.
(2) channels of audio are sourced from Danta connection to QSC in the DSP allowing synchronization with the video content. The (2) DSP outputs feed (2) Rehnkus Heinz steerable speaker. The output speaker‐level audio channels feed (15) QSC 6” outdoor‐rated loudspeakers and (7) QSC Dual 8” outdoor-rated subwoofer. Speaker specification is likely to change based on discussions with SMT. Exact locations and mounting method shall be detailed on layout drawings.